$0.00
CheckoutMassive selection of filters for bikes
Taking care of your vehicle should always come first for speed
enthusiasts. Nowadays, there are various filters for bikes. High-quality ones
ensure the reliable operation of a bike engine and significantly extend its
service life. The most important thing is the timely replacement of them. We
will look at what air
filter for motorcycle is intended for in this article.
How often should they be changed?
One of the bikes' most important operating rules is to replace
consumable components on time. For vehicles, these are motorcycles air filter. They have a
specific service life, which various factors influence.
Replacing it in parallel with the air filter and changing the engine
oil in the bike engine (approximately every 5-10 thousand km) is recommended.
It applies to bikes traveling on the highway. If we are talking about
specialized ones, an individual approach is needed because sportbikes and
motocross bikes are subject to more significant loads, meaning a vehicle's oil
and air motorcycle filters
must be changed much more often. Next, let's look at these air filters motorcycle in
more detail.
Main varieties
We want to figure out what role air filters for motorcycles play. When moving, a
vehicle engine consumes both gasoline and a mixture of air and gasoline. The
carburetor prepares this mixture in a specific ratio. If there is no access to
oxygen, the fuel will not ignite. Before energy enters the engine, it passes
through the vehicle tools, which clean the air. In the absence of this filter motorcycle, the
air containing dust will not be able to be purified, which will then enter the
motor, and this will lead to its rapid wear. Let's list what types of air filter motorcycles there
are.
Oil
It is designed to clean oils and hydraulic fluid. There is a
partial-flow and a full-flow tool. Sometimes, these two types are used
simultaneously. The oil
filter for motorcycles comes in the following types:
●
coarse: used
for bikers with small cubic capacity, traps larger particles by passing liquid
through a metal or plastic mesh.
●
open: their
design is similar to an air tool; the only difference is the use of certain
fibers for cleaning; such motorcycle
filter prevents particles from clogging the engine;
●
in a rigid
housing: they are closed metal glass that is screwed into the engine; they
differ in the dimensions of the filtration components and threads.
Changing them simultaneously is recommended to ensure more efficient
operation of the bike engine. Each vehicle owner uses the motorcycle oil filter
that suits him best. To select high-quality air and oil filter motorcycle, the All Automotive
Accessories online store presents a vast range of bike tools.
Foam rubber
They are impregnated with oil and used in bikes on polluted roads. To
clean foam motorcycle air
filters, you must repeatedly wash them in a solvent, wring them out, and
then dry them.
Fabric
They are made of gauze fabric placed inside a metal housing. Such filters motorcycle are
very effective in operation, providing purified air. It is also filled with
oil. To clean it, use water and soap. After washing, filter motorcycles are thoroughly dried and
refilled with oil.
Paper
If the above varieties don't suit you, you may want to consider this
one. Such an air filter
for bike is typically used for street vehicles, but they stop working as
soon as they get wet. They restore their filtration functions upon completion
of drying. To clean, blow air through the ventilation holes.