XUYUAN 1000W Car Inverter Power Converter with USB, Specification: 24V to 220V

1. Input voltage: DC10-15V (12V), DC20-28V (24V)

2. Output voltage: AC220/110 +/-5%

3. Output frequency: 50/60Hz

4. Low voltage alarm: DC10V-11V (12V), DC18V-19V (24V)

5. Low voltage shutdown voltage (no load): DC10V+/-2V (12V), DC18V+/-2V (24V)

6. High voltage shutdown voltage (no load): DC15V+/-2V (12V), DC29V+/-2V (24V)

7. No load loss: less than 0.2A

8. Conversion efficiency: greater than 90%

9. Output voltage waveform: square wave

10. Power: 600W

11. Peak power: 1000W

12. Size: about 19.1x9.5x5.5 cm

13. Weight: about 1000 grams

14. Uses: suitable for all automobiles, wind power, solar power, pollution-free power generation, etc.

15. Features: suitable for continuous use of laptop computers in the car, with automatic protection against overload, overvoltage, overtemperature, and short circuit, aluminum alloy shell, sturdy and durable, beautiful and lightweight, fine workmanship, convenient and practical

16. Description:

-It is strictly forbidden to connect the positive and negative poles of the voltage input terminal: the red power input wire should be correctly connected to the positive pole of the inverter and the battery, and the black power input wire should be correctly connected to the inverter and the negative pole of the battery

-In order to ensure the stability of the input voltage, the input terminal of the inverter must be firmly tightened, the wire clamp must be fully connected to the positive and negative poles of the battery, and the battery interface must be clean and not severely oxidized, otherwise the inverter will be affected by the input voltage. Unstable and frequent entry into low-voltage protection state, and cause failure