12V 60W Oil / Crude Oil Fluid Sump Extractor Scavenge Exchange Transfer Pump Suction Transfer Pump + Tubes for Auto Car Boat Mot

1. Project height: 9cm

2. Product weight: 1000g

3. Plug type: US

4. Model name: AUAS

5. Input voltage: 12V DC

6. Rated current: 5A

7. Sound: 70 dB

8. Vibration: less than 2.5m/s2

9. Flow rate: 1.5 L/min

10. Conveying height: 2.3 ft

11. Material: plastic and aluminum

13. Engine oil (4060 degrees) flow rate: about 1L/min

14. Crude oil flow: about 250L/hour

15.Inlet hose length: about 155 cm / 61 inches

16. Outer diameter of imported hose: 6 mm/0.236 inch

17. Inner diameter of imported hose: 4 mm/0.157 inch

18.Export hose length: about 124.5 cm / 49 inches

19. Outlet hose diameter: 12 mm/0.472 inches

20. Outlet hose inner diameter: 10 mm/0.39 inch

21. Cord length: about 71 cm / 28 inches

22. Application: Petroleum crude oil extractor is used in motorcycles, caravans, automobiles, quad bikes, industrial/chemical equipment, water purification and treatment equipment, vehicle cleaning, agricultural spraying, etc.

23. Multifunctional: The fuel pump is suitable for pumping oil, heating oil, water and other non-corrosive liquids.

24. Compact and portable: Hand-held pumps using rotating barrel pumps make it easier and safer to clean and change oil. Built-in bypass valve and filter, easy to clean the oil pump.

25. Operation: The oil suction gun can simply draw the oil out of the motor through the oil dipstick hole. The fluid pump is operated by connecting the clamp to the car battery.

26. This high-efficiency fuel pump is ideal for quick and clean oil changes.

27. Regarding the installation, you just need to put the inlet and outlet hoses in the appropriate places, connect the power clamp to the car battery and press the button.

28. This process is very simple, you can do it yourself to ensure that your engine runs smoothly.