$0.00
CheckoutFuel tank plug
Any car fuel tank must be tightly and securely closed with a unique
lid. The car gas tank
cover is a small and almost invisible part. But this does not mean that
its importance should be downplayed. Although they may seem simple, they still
exist in different types.
General information
The cover that provides access to the fuel tank cover for car is responsible for several
main options:
●
prevents
gasoline theft;
●
performs a
protective function in the event of changes in fuel pressure in the gasoline
tank;
●
prevents
involuntary fuel leakage while the machine moves, even if it turns over.
In other words, a
gas tank cover car is the part that seals the gas tank. This plug keeps
the pressure inside the fuel tank within regulatory limits. The lid's design is
not a simple plug; it is equipped with valves, which regulate the pressure. It
can also be quickly removed if necessary to refuel the car.
Fuel in the open air evaporates, affecting the pressure change in the
tank, which can lead to its rupture. And the car's gas tank cap, equipped with
valves, reduces pressure. The plug also normalizes the pressure in the car fuel tank cover while
the car is moving – the pressure decreases due to fuel consumption, and the cap
compensates for this. The fuel plug is a minor but essential component,
including ensuring safety.
Plug design
The car tank cover
is a small body with threads or special protrusions. There are one or two
valves inside. The top of the plug body has a casing with holes for air
movement (there are also holes on the side).
The valve design may include a diaphragm or a pin. Valves that have a
diaphragm are more modern. Thanks to them, the pressure immediately decreases.
They also have high throughput. Valves with pins are a simple design: one part
rests on the bottom of the plug, and the second covers the hole in the plug.
There are discs on both sides of the pin.
If the car oil
tank cover is equipped with two valves, they form a steam-air path.
These valves operate independently despite appearing to be a single system. As
a rule, a valve with a pin is used for the inlet. This valve is located on the
large diaphragm, which belongs to the intake valve.
What types of fuel plugs are there?
Depending on the type of fastening, gas tank covers for cars are divided into the
following types:
●
threaded –
screwed into the neck;
●
bayonet type
– screwed into the neck at a slight angle;
●
with a
folding lock – their fixation in the neck is ensured by slight pressure (the
principle is similar to gasoline cans).
Threaded ones are common in cars, and bayonet ones in trucks. The most
modern option is plugs with a hinged lock. They function well but are
unreliable, so they are less common. Depending on the pressure control system,
the gas tank cover for car
can be of the following types:
●
with one
valve (inlet) – they balance the decrease in pressure using one valve: they
increase the pressure but do not decrease it; therefore, they are installed in
machines with an adsorber;
●
with two
valves (inlet and outlet) – in this case, the plug can both increase and
decrease the pressure, but this design is more likely to break;
●
without valves
– used in cars with an adsorber and a unique system for regulating pressure.
The most common lids are with one valve. If you need a fuel or car oil
tank cap, the All Automotive Accessories website has many quality products. Our
specialists make sure that the assortment of our online store is replenished
only with high-quality products from the best manufacturers.