Creator C502 V7.6 Car OBD2 Multi-system Scanner Car Diagnostic Tool for Mercedes-Benz before 2016 All Models

1. Software Version: C502 V10.1

2. Supports for all the Mercedes-Benz models before 2016

Include Chassis: 117, 129, 140, 156, 163, 164, 166, 168, 169, 170, 171, 172, 176, 197, 199, 202, 203, 204, 205, 207, 208, 209, 210,211, 212, 215, 216, 217, 218, 219, 220, 221, 222, 230, 231, 240, 245, 246, 251, 253, 292, 461, 463, X 164, X 204.

3. Functions: Read codes, Erase codes, ECU information

4. Creator C502 OBDII & EOBD Software Description:

Works on all 2001 and later OBDII compliant PETROL European vehicles

Works on all 2004 and later OBDII compliant DIESEL European vehicles

Works on all 1996 and later OBDII compliant US and Asian vehicles

Easily determines the cause of the Check Engine Light ( MIL)

Retrieves generic (P0, P2, P3, and U0) and manufacturer specific (P1, P3,and U1) codes

Turns off Check Engine Light (MIL), clears codes and resets monitors

Displays DTC definitions on unit screen

Views freeze frame data

Identifies pending codes

Reads live PCM datastream

Graph displays live PCM datastream

Read I/M Readiness Status

Displays live O2 sensor test data

Performs modules present test

Retrieves vehicle information (VIN, CIN and CVN)

Supports CAN (Controller Area Network) and all other current OBD-II protocols

5. Specifications:

(1). Display: Color, 320 x 240 pixel display with contrast adjustment

(2). Operation Temperature: - 20~75 degree Celsius

(3). Storage Temperature: -40~120 degree Celsius

(4). Power: 8V -- 24V

6. A communication error occurs if the scan tool fails to communicate with the vehicle ECU (Engine Control Unit).

You need to do the following to check up:

(1). Verify that the ignition is ON;

(2). Check if the scan tools OBD II connector is securely connected to the DLC of vehicle;

(3). Verify that the vehicle is OBD2 compliant;

(4). Turn the ignition off and wait for about 10 seconds. Turn the

(5). Ignition back to on and continue the testing.

(6). Verify the control module is not defective

7. Scan tool does not power up

If the scan tool won not power up or operates incorrectly in any other way, you need to do the following to check up:

(1). Check if the scan tool OBD II connector is securely connected to the DLC of vehicle;

(2). Check if the DLC pins are bent or broken. Clean the DLC pins if necessary.

(3). Check vehicle battery to make sure it is still good with at least 8.0 volts.

8. Package List:

1 x C502 Machine

1 x Manual