AE1802 Automobile Battery Tester Automobile Digital Integrated Battery Capacity Tester

Details:

1. Material: ABS/PC

2. Weight: about 260 grams

3. Size: about 11x7.7x3 cm

4. Analysis index: 10 (CCA, CA, BCI, MCA, SAE, GB, JIS, IEC, EN, DIN)

5. Application: 12V lead-acid battery for starting

6. Features: ABS body, side rubberized, comfortable touch, VA LCD display, white characters on black background, clear reading, easy to use, easy to operate

Battery test function:

-Switch to the battery test function in the test function selection interface, and short press the confirm key to enter the battery test input interface. Use the left and right keys to move the cursor position, and use the up and down keys to set the cursor value. Please refer to the measurement standard range input for battery input value. After confirming the input value, short press the confirm key to start the test and enter the battery test output interface.

-In the battery test output interface, you can quickly repeat the measurement by pressing the confirm button, and short press the left button to return to the test function selection interface. The battery test results will give three suggestions for good, warning, and replacement respectively. If the battery voltage is too high or too low, it will greatly affect the test results, and the recommended reference will not be provided. The interface displays the battery voltage too high or too low.

Note:

1. In the battery test input interface, the left button cannot return to the test function selection interface

2. To select JIS standard input, please refer to the JIS-CCA comparison table to enter the CCA value

3. In the battery test input interface, the last battery test input value is enabled by default